The PS4 includes a DualShock 4 wireless controller, allowing seamless gameplay by wirelessly connecting to the console. However, users occasionally encounter issues with this controller. Some reported problems include the PS4 controller flashing a white light, disrupting the gaming experience, and difficulties in connecting the controller to the PS4.
Encountering the PS4’s white light issue can stem from various causes, such as misconfigurations, system-related problems, or glitches within the controller itself. If you’ve experienced this error, you’ve landed in the right spot.
Fix PS4 Controller Blinking White Problem
Here we will be discussing how you can fix the PS4 controller flashing white issue.
Restart The PS4
The initial step to address this is by restarting your PS4. Often, this error arises from system glitches or temporary bugs. In such instances, troubleshooting may not be necessary as a simple restart of the console can resolve the issue.
Restarting the PS4 refreshes the system and clears any corrupt temporary data responsible for the blinking white issue with the PS4 controller.
Try Connecting Your Controller With A Micro USB Cable
The wireless controller that accompanies the PS4 can be used wirelessly with the system. However, if you encounter issues with the PS4 controller, attempting a wired connection using a Micro USB cable may help resolve the problem.
Here are the steps to connect your PS4 controller with a Micro USB cable:
- Turn off your console.
- Once all lights on the console have turned off, unplug the power cable.
- To fully drain the power from the PS4, press the power button for 30 seconds, ensuring complete power depletion.
- Connect your controller to the PS4 using a Micro USB cable.
- After connecting, turn on the PS4 console.
- Once the console is powered on, check if the issue with the PS4 controller flashing white persists. If the problem persists, proceed to the next troubleshooting method.
Reset Your Controller
If the previous method doesn’t resolve the issue, you can attempt to reset your controller. This action refreshes the PS4 controller and typically resolves the problem. Follow the steps below to reset your PS4 controller:
- Ensure your controller is powered on and still displaying the flashing white light before initiating the reset. Locate the reset button on the back of your controller, near the top right screw close to the L2 button.
- To reset the controller, use a small pin or a SIM ejector tool. Press the reset button using the pin for approximately 3 seconds.
- After resetting the PS4 controller, turn off your console.
- Power on your console again and reconnect the controller to the PS4.
This process should resolve the issue, eliminating the flashing white light on the PS4 controller. However, if the error persists, proceed to the next troubleshooting method.
Use A Different Controller
Another step to consider is using a different controller. If an alternate controller functions properly on your PS4, it could indicate an issue with your original controller. However, if the second controller exhibits the same problem on your PS4, you may need to boot your PS4 in safe mode and proceed with troubleshooting.
Booting Your PS4 In Safe Mode
If none of the previously attempted methods resolved the issue, attempting to boot your PS4 in safe mode could be the solution. Safe mode enables troubleshooting and easy resolution of problems. Before proceeding, ensure you back up all data on your PS4.
Follow these steps:
- Power off your PS4 completely.
- With the PS4 turned off, press and hold the power button until you hear two beeps. Maintain the button press until you hear the second beep.
- The first beep sounds upon pressing the power button, and the second beep follows approximately 7 seconds after holding down the power button.
- Connect the PS4 controller using the USB cable, then press the PlayStation button on the controller to successfully access Safe Mode.
- In Safe Mode, select the option labeled “Rebuild Database.” The console will initiate a drive scan.
- A new database of the content will be created. Allow the process to complete. Note that this procedure might delete all data and configurations on your PS4.
- Once the process finishes, the issue of the PS4 controller flashing white should be resolved.