In this guide, we’ll take you through various methods to ensure your PS4 is fully charged, allowing you to enjoy uninterrupted gaming without concerns about device functionality.
The slow blinking light on the PlayStation 4 controller indicates that it’s in the process of charging. However, this might not be immediately obvious, as the blinking light suggests an attempt to establish a connection.
To gauge the charging status of the PS4 joystick, users can observe its light bar. If it’s charging, the light bar will flash orange. Subsequently, the bar’s light will gradually fade and turn off once the battery reaches full charge. Additionally, while in rest mode, you can hold and press the PS button to display the battery status at the top of the screen.
It can be disheartening to have your gaming session interrupted due to a dead controller battery. Even a long-lasting battery may not prevent this inevitability, considering the lengthy and demanding nature of many PS4 games that require sustained concentration. Instead of letting frustration take the fun out of your gaming experience, consider checking the charger’s requirements to ensure your controller is appropriately charged.
How To Tell if a PS4 Controller Is Charging?
Testing your controller when it’s completely depleted is the ideal approach, providing an objective measure of battery lifespan.
To conduct the test, connect the controller to the PS4. Once connected, you can press each button on the controller, helping you differentiate between hardware and software issues.
Given that the DualShock 4 controller is widely used, you can connect it using the micro USB cable for testing purposes.
How Long Does It Take for A PS4 Controller to Charge Halfway?
The PS4 controller, known as DualShock 4, is equipped with a lithium-ion battery requiring a 5V 800mA charge. When fully depleted, it takes approximately 2 hours to reach a full charge. If you wish to restore half the charge, a one-hour charge suffices, but only if the battery has been completely depleted.
While it’s not mandatory to fully charge the DualShock, the PlayStation 4 User’s Guide recommends giving the controller a complete charge at least once a year to prolong the battery’s overall lifespan.
Contrary to certain myths surrounding lithium batteries, the suggestion of maintaining the controller’s charge between 25% and 90% may be applicable in general cases but is not essential for the DualShock 4.
Addressing the misconception that PS4 controllers can be used while charging, when the console is in standby mode, it stops charging the controller upon reaching 100%, providing sufficient power for operation without causing harm. The battery remains at 100%, and while this practice does not damage the controller, the battery ions continue to function indefinitely.
How to Know if PS4 Controller Is Charging Properly?
The recommended approach for charging the PS4 controller involves connecting it to your PlayStation using a USB-A connector.
Ensure that the PlayStation 4 is either powered on or in rest mode, with the controller’s lights continuously blinking to indicate the charging process.
Upon the controller reaching a full charge, the light either fades away (if the controller is not in use) or stops blinking altogether.
To confirm that you are charging the controller correctly, observe the following specific signals:
- Lights blinking slowly (color is not crucial).
- Check the PS4 indicator to assess the controllers.
- View the battery status in the upper right corner of the PlayStation 4 screen.
Check to Make Sure it Is in the Rest Modelo top.
To enable charging for your PS4 controller during periods of inactivity, ensure it’s in rest mode. Upon obtaining the device, connect it to the PS4 system and establish a connection with the console using a USB cable while the system is active.
Confirm that your system is either in rest mode or powered on. Assess the battery charge level by holding and pressing the PS button, with the status displayed on the screen indicating the controller’s charge. To facilitate charging during rest mode, navigate to Settings, select Power Saving Settings, and adjust the Rest Mode features, ensuring the Supply Power to USB Ports option is set to a mode other than Off.
Opting for a wireless controller enhances flexibility while gaming on the PS4 system, allowing you to connect up to four controllers. Each controller must be individually paired and connected. Once paired, you can charge the batteries by connecting them to your PS4 system using a USB cord.
The longevity of your battery is contingent on your controller usage habits and conservation practices. Pay attention to room temperature, and with careful controller management, you can expect approximately eight hours of gaming from the battery.
Why why isn’t my PS4 controller isn’t it charging?
If your PS4 controller fails to charge, consider changing the charging cable or inspecting the charging port. Additionally, you can attempt adjusting settings, pairing the controller, or powering off your PS4, as the issue may stem from either the charging cable or port.
How Do I Check My Controller Battery on PS4?
To check the controller’s battery status, either connect the controller to the PS4, and observe the battery icon displayed next to your username on the screen. Alternatively, hold and press the PS button on the controller for a few seconds, even if the controller is not currently connected.
Another way to monitor the battery status during charging is through the well-known light bar. When the PS4 controller is being charged, the light bar will flash in an amber color. Once the controller is fully charged, the light bar will turn off.
Can I Use My PS4 Controller When Charging?
We now have a clearer understanding of the time it takes for PlayStation 4 controllers to fully charge. If you’re wondering whether you can use the controller while it’s charging, the answer is yes.
You can seamlessly continue gaming while the controller is charging. As long as your PlayStation 4 controller is connected to your PS4 and charging is in progress, it remains operational for use.
However, it’s worth noting that using your controller during the charging process may extend the time needed for a full charge. Additionally, continued usage during charging may lead to further wear and potential damage to the controller’s charging port over time.
What’s up that has my PS4 controller flashing orange?
An orange light on your PS4 controller signals that your PS4 is in rest mode. When the PS4 controller is charging, a yellow light is displayed, while a white light indicates that it is either not connected to the PS4, not linked, or its battery is depleted.
Many individuals often inquire about the color the PS4 controller will display during charging. When you initiate charging, the light bar slowly blinks or flashes amber. During assessment, the light bar transitions gradually from white to amber. Upon reaching a full charge, the light bar turns off.
How To Save Power
There are a few tips that can enhance the performance of your PlayStation controller, and one of them is dimming the controller’s light bar.
Bright light bars may not provide significant benefits for most gamers. Fortunately, you can adjust the brightness through the Sound/Devices menu while ensuring the camera remains fully functional and capable of signal detection.
Another way to extend battery life is by turning off vibrations. For those using the DualShock 4 controller, which comes equipped with a built-in speaker, you can lower the volume and intensity of vibrations through the quick access menu. If you prefer to disable both controller volume and vibration entirely, navigate to the Controllers menu and turn off feedback to the player.
Conclusion
You can use the controller while it’s charging, even when it reaches 100%. It takes approximately two hours for the controller to reach a full charge, and the battery should provide about eight hours of usage, whether slightly more or less.
It’s worth noting that players can charge the controller while actively playing, and DualShock 4 controllers are designed to withstand this practice!
Leave a Reply
Your email address will remain private and will not be published. Mandatory fields are indicated with an asterisk (*).
- Name *
- Email *
- Website
- Comment *
Save my name, email, and website in this browser for future comments.
About Tech Client
TechClient is a web magazine based in the United States, operating independently and committed to producing top-notch content sourced from various online platforms. Our coverage spans a wide range of subjects, encompassing technology to design.